Surge Protection Device SPD Single Phase
₨5,500.00
Surge Protection Device SPD Single Phase
Phase : Single Phase
Brand : FEEO
Class : A
Voltage Rating : 230 V
Number Of Poles : 2.0
Surge Protection Device SPD Single Phase
Phase Single Phase
Brand VSP
Class A
Voltage Rating 230 V
Number Of Poles 2.0
Discharge Current kA 40
Color WHITE
Number Of Modules 1
Power 230
Minimum Order Quantity 1 Number
Product Description
DescriptionThis high quality yet affordable AC SPD is a surge protection device suitable for power supply system of AC 50/60 Hz, It is designed according to IEC61643-1, GB18802.1 standards. There is a failure release mounted on the module of surge protection device. When the SPD fails in breakdown, for over heat and over current, the failure release will help electrical equipments to separate from the power supply system and give the indication signal, green or red.
Specifications Related Operating Voltage Un: 220V Maximum Continuous Operating Voltage Uc: 275 V Type: Type II Voltage Protection Level Up in kV: ≤ 1 Nominal Discharge Current In (8/20s) kA: 20 Max. Discharge Current Imax (8/20s) kA: 40Response Time (ns): ˂ 25 Test Standard: IEC61643-1, GB18802.1 Operating Environment: -40°C to 85°C Maximum Connection Line: 35 mm² hard wire or 35 mm² strand wire copper line Recommended Connection Line: 16 mm² hard wire or 25 mm² strand wire copper line Installation: Standard Rail 35mm Material for Outer Covering: Burning proof NylonFeatures & detailsInside over-current and over-heat protection, temperature control open circuitModule design, convenient installationTime of response ˂ 25nsThe color of visible window shows operating status: Green (normal) / Red (abnormal)Product informationManufacturer FEEOItem part number FSP-A40Item Weight 200 g
Only logged in customers who have purchased this product may leave a review.
Related products
-
Add to cart
Electrical Characteristics
Electrical parameters at STC
- Nominal Power (Pmax) 150W
- Open Circuit Voltage (VOC) 22.6V
- Short Circuit Current (ISC) 8.90A
- Voltage at Nominal Power (Vmp) 18.2V
- Current at Nominal Power (Imp) 8.52A
- Module Efficiency (%) 15.72
-
Add to cart
•Excellent microprocessor control optimizes reliability
•Wide range of power input
•Double boost and buck AVR for voltage stabilization
•Auto restart while AC is recovering
•Long back up time with external battery
•Simulated sine wave
•Cold start function
•Charging current selectable
•Perfect protection for overload ,short circuit ,over-voltage ,low-voltage and over-heating etc.
•Display: LED providing status, load and battery information
•Intelligent battery management
-
Add to cart
Brand Smarten Output Frequency 50 Hz Output Voltage 220VAC Output Waveform Pure Sine Wave No Load Current 0.3Amp. Capacity Resistive Bulb Load 1400Watt -
Add to cart
- User Friendly LCD Display & Interface.
- Solar Panel Capacity: Upto 500W.
- Smart Solar Optimization Usage Settings.
- Low Cut: 175 ± 10V (UPS) & 90 ± 10V (WUPS).
- Low Cut Recovery: 185 ± 10V (UPS) & 110 ± 10V (WUPS).
- High Cut: 265 ± 10V (UPS) & 295 ± 10V (WUPS).
- High Cut Recovery: 255 ± 10V (UPS) & 285 ± 10V (WUPS).
- Change Over Time: Less than 10ms (UPS) & Less than 30ms (WUPS).
- Overload: Greater than 110%, Charging Boost Voltage (LA/Floded): 14.0 ± 0.2 Each Battery & Charging Boost Voltage (Tubular): 14.5 ± 0.2 Each Battery.
- Low Battery Warning: 10.7V ± 0.2V Each Battery, Low Battery Cut: 10.5V ± 0.2V Each Battery & DC Load Battery Cut: 10.3V ± 0.2V Each Battery.
- Solar Charger: PWM, Max. Solar Input Voltage (Voc): 25V Each Battery & Charging Priority: Battery is Always Charges through Solar Priority.
- Battery Priority: Firstly Use Solar Power & Check Battery Charged Status After that Use Battery 20% if Solar Power is Available.
- Grid Priority: Charged Battery Always from Solar as Well as Grid if Solar is not Sufficient.
Smarten Saver 3500VA 48V DC Solar PCU with LCD Screen is a premium quality product from Smarten. Moglix is a well-known ecommerce platform for qualitative range of Solar Inverter. All Smarten Saver 3500VA 48V DC Solar PCU with LCD Screen are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture Smarten Saver 3500VA 48V DC Solar PCU with LCD Screen, are sourced from the most reliable and official vendors, chosen after performing detailed market surveys. Smarten products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Smarten Solar Inverter .
-
Add to cart
Brand Smarten Capacity 500VA Output Frequency 50 Hz Output Voltage 220VAC Output Waveform Pure Sine Wave No Load Current 0.3Amp.
Reviews
There are no reviews yet.